We stock Crewsaver fitment lifejacket rearming kits with co2 in 23g, 33g and 60g sizes!
Automatic Cartridge & Clip for Crewfit Sport Automatic Lifejacket - 2015 On
This UML Cartridge and clip will fit all Crewfit Sport automatic lifejackets with UML-5i type inflator manufactured from 2015 on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
The white writing on your cartridge will show the expiry date.
This new cartridge and clip is supplied with over two years service life.
These parts have a sell...
Crewsaver 23g Cylinder
Genuine Crewsaver 23g Cylinder.
23g co2 cylinder. Also referred to as 23gm 23gr 23 gram, co2 23g.
Fits all Crewsaver Child Gas Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver 33g Cylinder
Genuine Crewsaver 33g Cylinder.
*From 2021 genuine Crewsaver cylinders are now shorter and wider than originally supplied. This reduces the chance of the cylinder rubbing on the collarbone. Contains exactly the same amount of gas.
33g co2 cylinder. Also referred to as 33gm 33gr 33 gram, co2 33g.
Fits all Crewsaver 150N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce...
Crewsaver 38g Cylinder
Genuine Crewsaver 38g Cylinder.
38g co2 cylinder. Also referred to as 38gm 38gr 38 gram, co2 38g.
Fits all Crewsaver 190N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver 60g Cylinder
Genuine Crewsaver 60g Cylinder.
60g co2 cylinder. Also referred to as 60gm 60gr 60 gram, co2 60g.
Fits all Crewsaver 275N and 290N Lifejackets.
Crewsaver lifejacket cylinders are zinc coated to reduce rust. There cylinders have been tested and labelled by Crewsaver.
Quantity discounts available on 10+ cylinders, please email or call for details!
Crewsaver And CSR Automatic Cartridge & Clip - 2009 On
This Crewsaver CSR Cartridge and clip will fit all automatic lifejackets that use the UML-5 and UML-5i type inflator. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L. This will fit all Crewsaver and CSR automatic lifejackets from 2009 - present.
The white writing on your cartridge will show the expiry date, our example in the photo expires in...
Crewsaver And CSR Pattern Automatic Rearming Kit 33g - 2009 On (L)
This rearming kit will fit all Crewsaver and CSR 150N automatic jackets produced from 2009 and on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
This pattern kit includes one replacement cartridge, one 33g CO2 cylinder and one green clip. The cartridge has a black colour.
Our lifejacket cylinders are the very best available, they are zinc...
Crewsaver And CSR Pattern Junior Automatic 23g Service Kit - 2009 On
Current stock is 2024 manufactured and black cartridge expires April/2028
Crewsaver Auto Standard Clip - Pre 2009
This rectangular green clip is found on Crewsaver automatic lifejackets that were produced up until the end of 2009 season. if your Crewsaver jacket was made after this date you need a '2009 on united moulders' clip.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
Crewsaver Crewfit Sport Pattern Automatic Re-arming Kit 33g - 2015 On
This rearming kit will fit the Crewsaver Crewfit Sport 165N automatic jackets produced from 2015 and on. Described as the 'MK5i inflator' model jackets with serial numbers starting with the letter L.
This pattern kit includes one replacement cartridge, one 33g CO2 cylinder and one green clip. The cartridge has a black colour.
Our lifejacket cylinders are the very best available, they...
Crewsaver Crewfit Sport Pattern Manual Re-arming Kit 33g - 2015 On
This rearming kit will fit the Crewfit Sport 165N manual jackets that use the light grey Halkey Roberts manual inflator, with 33g CO2.
The kit includes one 33g CO2 cylinder and one green clip. Second picture shows the older type manual inflator, there are two different pull cords the other has a round red end.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce...
Crewsaver Crewfit Sport Pattern Manual Rearming Kit 33g
This rearming kit will fit the Crewfit Sport 165N manual jackets that use the tan Halkey Roberts V87400M mini manual inflator and Crewsaver lifejackets manufactured between January 2020 and October 2020 with serial numbers beginning with the letters HR, with 33g CO2.
The kit includes one 33g CO2 cylinder and one green V87400M clip.
Our lifejacket cylinders are the very best available, they...
Crewsaver Ergofit Hammar Operating Head
Replacement Hammar Head suitable for Crewsaver Ergofit Lifejackets
Custom designed black pull cord
Supplied with fitting instructions and key
Fits Crewsaver Ergofit Hammar Lifejackets: Ergofit 190 OS, Ergofit 290N / Extreme / OC and the 2019 Ergofit +
Crewsaver EXOLOK Clip for UML model inflators
Exolok clip with sticker
Crewsaver EXOLOK Tamper Sticker
Replacement EXOLOK tamper sticker
Crewsaver Fitment Hammar Auto Head - 2029 Expiry!
This replacement operating head will fit all 150N automatic jackets that use the hammar M1A1 (hydrostatic) automatic inflator. (Sometimes mis-spelt as Hammer.)
The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. See video for fitting instructions.
These parts have a sell by / use by date - ours are guaranteed to be the freshest...
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 33g - 2029 Expiry!
This rearming kit will fit all 150N automatic jackets that use the Crewsaver hammar M1A1 (hydrostatic) automatic inflator.
The kit includes a replacement Hammar hydrostatic head, 33g CO2 cylinder fitted to new backing plate, fitting instructions and a fitting key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part!...
Crewsaver Fitment Hammar M1A1 Standard Rearming Kit 60g - 2029 Expiry!
This rearming kit will fit all 275N automatic jackets that use the Crewsaver hammar M1A1 automatic inflator.
The kit includes one replacement Hammar head, one 60g CO2 cylinder fitted to a new backing plate, fitting instructions and key.
*Note we are the only UK supplier who supplies the co2 cylinder fitted to a new backing plate, do not accept a kit without this part! Plus current stock has expiry...
Crewsaver Hammar Manual Conversion Kit
This replacement head fits in place of the automatic head on the crewsaver hammar inflator, simply converting the jacket to manual only firing.
It is a factory part and is fairly easy to fit in seconds. It has no shelf life. Comes complete with a key to aid in fitting.
If you are unsure which part your lifejacket accepts please email us before ordering!
Crewsaver Junior Auto Rearming Kit 23g Pre 2009
This rearming kit will fit all Crewsaver Junior childrens lifejackets that use the crewsaver standard automatic inflator, these jackets were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
If your Crewsaver jacket was made after this date you need a '23g united moulders'...
Crewsaver Pattern Standard Auto Rearming Kit 33g - Pre 2009 (0-9/R)
This rearming kit will fit all 150N automatic jackets that use the Crewsaver standard automatic inflator, these jackets were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
If your Crewsaver jacket was made after this date you need a '33g united moulders' kit. The kit fits...
Crewsaver Standard Auto Cartridge & Clip - Pre 2009
This Crewsaver Cartridge and clip will fit Crewsaver automatic life jackets that were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
The second picture shows the very old original part that this one also replaces.
The white writing on your cartridge will show the expiry date,...
Crewsaver Standard Auto Rearming Kit 60g - Pre 2009
This rearming kit will fit all 275N automatic jackets that use the Crewsaver standard automatic inflator, these jackets were produced up until the end of 2009 season. Described as the 'MK3A inflator' model jackets with serial numbers starting with the numbers 0 to 9 or the letter R.
If your Crewsaver jacket was made after this date you need a '60g united moulders' kit. The second...
Crewsaver Thigh Straps
Crewsaver Thigh Straps
Thigh straps make falling out of your lifejacket an impossibility, and is an essential lifejacket accessory.
These thigh straps can be fitted to most Crewsaver lifejackets. They give extra protection to the user by ensuring that the jacket does not ride up in the water and are particularly recommended for use by children.
Full fitting instructons are included.
Colour:...
Genuine Crewsaver Ergofit 38g MA1 Hammar Re-arming Pack
Replacement Hammar Head and CO2 cylinder
Supplied with fitting instructions and key
Fits Crewsaver Ergofit Hammar Lifejackets
Check Lifejacket for size of cylinder required
38g fits 190N Ergofit models
Genuine Crewsaver Ergofit 60g MA1 Hammar Re-arming Pack
Replacement Hammar Head and CO2 cylinder
Supplied with fitting instructions and key
Fits Crewsaver Ergofit Hammar Lifejackets
Check Lifejacket for size of cylinder required
60g fits 290N Ergofit models
Genuine Crewsaver Hammar Auto Head Kit
Expiry Dec 2029!
Genuine Crewsaver Hammar Re-arming Pack 33g
Expiry date Dec 2029!
Genuine Crewsaver Hammar Re-arming Pack 60g
Expiry Dec 2029!
Genuine Crewsaver Standard Automatic Re-arming Pack 23g (L)
Replacement capsule and CO2 cylinder
Supplied with fitting instructions
Fits Crewsaver Standard Automatic Lifejackets
Check Lifejacket for size of cylinder required
For Serial Numbers starting with L
Genuine Crewsaver Standard Automatic Re-arming Pack 33g (0-9/R)
Replacement capsule and CO2 cylinder
Supplied with fitting instructions
Fits Crewsaver Standard Automatic Lifejackets
Check Lifejacket for size of cylinder required
For Serial Numbers starting with number 0 to 9 or letter R
Genuine Crewsaver Standard Automatic Re-arming Pack 33g (L)
Replacement capsule and CO2 cylinder
Supplied with fitting instructions
Fits Crewsaver Standard Automatic Lifejackets
Check Lifejacket for size of cylinder required
For Serial Numbers starting with L?
Manual Clip For Crewfit Sport Manual Lifejacket - 2015 On
This manual clip will fit the Crewfit Sport Manual lifejackets manufactured from 2015 on.
Not the kind of part your local chandler would stock!
If you are unsure which part your lifejacket accepts please email us before ordering!
Pro Sensor Rearming Kit 38g For Ergofit Offshore, Ergofit CS & PRO 190N Automatic Lifejacket
This rearming kit will fit the Ergofit Offshore 190N, Ergofit CS 190N and Ergofit PRO 190N automatic lifejackets that use the UML Pro Sensor automatic inflator, with 38g CO2.
The kit includes one replacement head and a 38g CO2 cylinder.
The white writing on your cartridge will show the expiry date.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust....
Pro Sensor Rearming Kit 60g For Ergofit Ocean 290N Automatic Lifejacket
This rearming kit will fit the Ergofit Ocean 290N automatic lifejackets that use the UML Pro Sensor automatic inflator, with 60g CO2.
The kit includes one replacement head and a 60g CO2 cylinder.
The white writing on your cartridge will show the expiry date.
Our lifejacket cylinders are the very best available, they are zinc coated to reduce rust. Approx length 12cm. Made in Germany or Japan.
These...
United Moulders 23g Rearming Kit
Current stock is 2024 manufactured and black cartridge expires May/2027
United Moulders Cartridge & Clip Set - August/2028 Expiry!
United moulders Cartridge and clip will fit all automatic lifejackets that use the UML-5, UML-5i and UML pro sensor type inflator. This will fit all united moulders automatic inflators from 1992 - present. We supply this part with the green manual pull cord retaining clip.
The white writing on your cartridge will show the expiry date, our example in the photo expires in November 2021.
This new...
United Moulders Elite 38g Service Kit
The Pro Sensor Elite® Automatic Inflator replaces the Pro Sensor® Automatic Inflator which is currently found on automatic Crewsaver lifejackets - including; ErgoFit+, ErgoFit, Crewfit 180N Pro/ HD/HF, Crewfit 150N Junior, Seacrewader 290N 3D, Crewfit XD (non-wipe clean) range arriving August 2019.
Being 13mm shorter and 4 grams lighter than the original Pro Sensor® Automatic Inflator...